Cool Drawings That U Can Mold With Foil 3d

April 09, 2022 Post a Comment

Download Article

An excellent mask can be made using products found easily at dwelling: tin foil and tape. This is a straightforward project that is platonic for concluding-infinitesimal mask-making before the masked ball or any fancy wearing apparel do. Just see Step 1 below to become started.

Steps

ane
ii

Push the stack of sheets onto your face. Button down every bit difficult every bit you are comfortable pushing. Do information technology carefully, and so the foil does not become punctured. (It might exist useful to accept a helper do this part.)

Advertisement
iii

Check you lot take the general outline of your face imprinted: olfactory organ, lips, corners of your eyes and cheekbones. Use a marking and trace effectually your eyes (it might be good to follow the bones around your eye socket) for where y'all want to place the eye holes in your mask. Too, trace around anything else you desire cut out. (Breathing holes are useful for breathing!)yous might also want to cutting a hole for talking besides.
4

Carefully remove the foil from your face. Cut with sharp pair of scissors effectually the edges of the mask. And notation––one time you cut it, you tin't really go back hands, then get out extra.
v

Carefully cut out the eyes. Do this either by puncturing the foil with a toothpick and tearing the foil out, or snipping in the center of the expanse with the tip of scissors and folding the foil dorsum.
half dozen

Cut holes or slots in the side of your mask. These are for the ribbons/cord/shoelaces to adhere the mask to your face.
7

Cut small sections of tape. While pressing the mask to your face to keep the features strong, gently place the tape onto your mask. When you feel the mask's features are firm enough, place all the sections of tape, overlapping, beyond all visible places of foil, including the dorsum (foil is itchy next to the pare).
8

Necktie the cord to the holes in the side of your mask. Leave enough length to both wrap around your head, and to necktie in a nice knot or bow.
9
x

Decorate using acrylic paints. Pigment whatsoever you desire, making sure to leave it to dry out out of the way of children or pets. You lot tin even sprinkle glitter on the paint while information technology'due south wet if y'all like. Adding sequins, feathers, beads, etc. can heighten the mask.

Ad

Add New Question

Question

Can I apply Elmer gum or scotch tape? This seems a little complicated.

Yeah, any gum is fine, but scotch record might not work. It will make it wait also messy.
Question

Could I put tape over the tin foil or could I paint it?

If yous're going to pigment the mask, it's a good idea to encompass the foil with duct tape for a shine surface to paint on.
Question

What kind of tape is used here? Do I have to apply that tape?

The tape in the picture is masking tape. The masking tape looks nice and clean when overlapped, and it gives the mask a nice white-ish colour.
Question

How do I make a mask without masking record?

Apply a balloon and strips of newspaper. First, blow up the balloon. Adjacent, paste the paper strips on the airship with glue. To brand this pace work, use a paper machè method. And so, pop the balloon and cut out the eyes. Final but not least, decorate!
Question

Can I still paint the mask if I utilise duct record?

Aye, though the pigment would probably come off faster than if yous used masking record.
Question

Tin can I use duct record for this?

I don't see why not. I'd cut it small and it'd be okay.
Question

How tin can I add to the mask?

You could create horns, ears or a long nose with extra can foil, then utilise the tape to tape that to the mask.
Question

What type of tape do I need to make a mask?

Use duct tape if possible.
Question

Tin can I make this mask out of any other materials?

You lot could use craven wire if you carefully bent over sharp edges, or utilise papier mâché.
Question

Did you use masking tape in the example?

Yeah. Masking tape works the all-time because information technology is easiest to paint on. Clear record does not piece of work as well, and the paint may bleed through.

Prove more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Employ less foil to make a clearer banner of your face.
To make the mask look better, add a layer of white paint before the principal coat, fifty-fifty if y'all're making it white.
Acrylic paint dries fast. A little flake of paint goes a long way, so use sparingly and put the caps back on the paint tubes when done.
If in a rush and painting, turn on the heater and place the mask in front of it to dry (but not when using packing record, as it will pare right off).
The good news is that even when covered in tape, foil retains its flexibility, so any features lost in the taping process will still conform to your face when you vesture the mask.
If you desire to add on whatever features (horns, a pointed nose, antlers), just mold them out of foil and tape or glue them onto the mask.
Use packing tape if y'all want your mask to await crinkly and metallic.
You can also add ears if you fold the foil into triangles.
You can also decorate your mask with glitter.

Thanks for submitting a tip for review!

Advertizing

Things You'll Need

Really mucilaginous, firm record
Aluminum foil (aka kitchen foil)
Pair of scissors sharp enough to cut foil and your tape
Ribbon or string
Pigment (optional)
Glue (if you don't trust your tape)

Well-nigh This Article

Article Summary X

To make a mask out of can foil and record, get-go by stacking 3 sheets of foil on top of each other. And then, press the sheets of foil onto your face to create a mold of your confront shape. Adjacent, carefully remove the foil and cut around the edges of the mold with scissors so you're left with an oval-shaped mask. Once you've done that, puncture the heart holes with a toothpick or pencil and use the pair of scissors to cutting them out. Finally, cover the entire surface of your mask with tape so the foil stays in identify. To learn how to decorate your mask with pigment, keep reading!

Did this summary help you?

Thank you to all authors for creating a folio that has been read 847,297 times.